MSDS

11/19/2014Revision:
11/20/2014Printed:
Page: 5
Paint Thinner for SCAQMD
SAFETY DATA SHEET
09/04/2014Supersedes Revision:
control airborne levels below recommended exposure limits.
Use only with adequate ventilation to prevent buildup of vapors. Do not use in areas
where vapors can accumulate and concentrate, such as basements, bathrooms or small
enclosed areas. Whenever possible, use outdoors in an open air area. If using indoors
open all windows and doors and maintain a cross ventilation of moving fresh air across
the work area. If strong odor is noticed or you experience slight dizziness, headache,
nausea or eye-watering -- STOP -- ventilation is inadequate. Leave area immediately
and move to fresh air.
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, smoking, or using the
restroom.
Do not eat, drink, or smoke in the work area.
Discard any clothing or other protective equipment that cannot be decontaminated.
Facilities storing or handling this material should be equipped with an emergency
eyewash and safety shower.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
0.00 F Method Used: Setaflash Closed Cup (Rapid Setaflash)
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
0.8126
Density:
6.796 LB/GL
Water white liquid free and clear.
Appearance and Odor:
Vapor Pressure (vs. Air or
mm Hg):
No data.
Vapor Density (vs. Air = 1):
> 1
Evaporation Rate:
> 1
Solubility in Water:
slight
Percent Volatile:
100.0 % by weight.
VOC / Volume:
24.0000 G/L
Viscosity:
10 CPS
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format