MSDS

10/13/2009Revision:
11/19/2009Printed:
5Page:
Klean Strip Adhesive Remover / Klean Strip
Premium Stripper
MATERIAL SAFETY DATA SHEET
Use only with adequate ventilation to prevent buildup of vapors. Do not use in areas where vapors can accumulate
and concentrate, such as basements, bathrooms or small enclosed areas.
Whenever possible, use outdoors in an open air area. If using indoors open all windows and doors and maintain a
cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight
dizziness, headache, nausea or eye-watering -- STOP -- ventilation is inadequate. Leave area immediately and
move to fresh air.
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits.
Engineering Controls (Ventilation etc.)
A source of clean water should be available in the work area for flushing of the eyes and skin.
Wash hands thoroughly after use.
Do not eat, drink, or smoke in the work area.
Before reuse, thoroughly clean any clothing or protective equipment that has been contaminated by prior use.
Discard any clothing or other protective equipment that cannot be decontaminated, such as gloves or shoes.
Work/Hygienic/Maintenance Practices
9. Physical and Chemical Properties
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
NP
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
9.75 - 10.08
Density:
9.948 LB/GL
Bulk density:
No data.
Vapor Pressure (vs. Air or mm Hg):
25 MM HG at 68.0 F (20.0 C)
Vapor Density (vs. Air = 1):
No data.
Evaporation Rate (vs Butyl
Acetate=1):
> 1
Solubility in Water:
No data.
Percent Volatile:
97.0 %
VOC / Volume:
172.0000 G/L
Heat Value:
No data.
Particle Size:
No data.
Corrosion Rate:
No data.
pH:
10.0 - 10.5
Clear to white color.
Appearance and Odor
10. Stability and Reactivity
Stability:
Unstable [ ] Stable [ X ]
No data available.
Conditions To Avoid - Instability
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
ANSI Z400.1 Format