Operation Manual

14
EN
BEFORE FIRST USE
Wash all the accessories in hot, soapy water or in the dish washer. Thoroughly dry all
accessories and re-assemble in oven, plug oven into outlet and you are ready to use
your new toaster oven. After re–assembling your oven, we recommend that you run it at
the highest temperature (230 °C) on the toast function for approximately 15 minutes to
eliminate any packing residue that may remain after shipping.
Please familiarize yourself with the following oven functions and accessories prior to rst
use:
Ceramic Plates Control:
First use Function Control to choose „upper heater and rotisserie“ or „Lower heater and
convection“. Then choose left plate working, the oven is working with the left plate at the
same time, or right plate working, the oven is working with the right plate at the same
time or left and right hot plate working together - at this time, oven could not work, since
oven could work with one of ceramic plates at the same time.
The temperature Range of ceramic plate is 0~550°C, we use “off” “1”, “2”, “3”, “4”
to indicate the temperature is increasing from low to high, “1” is around 250°C℃, “2” is
around 350°C, “3” is around 450°C and “4” is around 550°C.
Left plate
Right plate
Both plates
Temperature Control:
Choose the desired temperature from 100 °C to 230 °C for cooking.
Function Control:
This oven is equipped with 3 functions for a variety of cooking needs:
Upper and Lower heater
On this position, upper and lower
heating elements work together.
Upper heater and Rotisserie
On this position,the upper two
heating elements and rotisserie can
work together.
Lower heater and Convection
The lower heating elements and
convection fan work together