Operation Manual
Table Of Contents
- IMPORTANT
- Section 1 ACCESSORIES
- Section 2 PREPARATION
- Section 3 BASIC OPERATION
- Section 4 ADVANCED OPERATION
- Section 5 SCAN OPERATION
- Section 6 MENU SCREEN
- Section 7 NXDN™ OPERATION
- NXDN™ system operation
- Transmitting a call
- Receiving a call
- Roaming function (For Multi-site Trunking operation)
- Site Lock function (For Multi-site Trunking operation)
- Site Select function (For Multi-site Trunking operation)
- Incoming list
- Outgoing list
- Encryption function
- Over The Air Programming (OTAP) function
- Section 8 MDC 1200 SYSTEM OPERATION
- Section 9 BIIS 1200 SYSTEM OPERATION
- Section 10 VOICE RECORDER FUNCTIONS
- Section 11 Bluetooth® OPERATION
- Bluetooth® Wireless Technology operation
- Turning ON the Bluetooth® function
- Pairing with a headset or a data device
- Headset settings
- Accepting a pairing request from a Bluetooth® device
- Disconnecting from a Bluetooth® device
- Deleting a Bluetooth® device from the pairing list
- Resetting the installed Bluetooth® unit
- The maximum number of paired devices
- Section 12 OTHERS
- Section 13 OPTIONS
9
BIIS 1200 SYSTEM OPERATION
9-8
Receiving a call
D Receiving an Individual call
When an Individual call is received:
• The Status indicator lights green�
• “ ” may be displayed or blink, depending on the
presetting�
• “ ” is displayed and the mute is released�
• The calling station name (or ID) is displayed while
receiving the signal�
Station 10
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�
3� After the communication is finished, push [Back]
to send a Clear Down signal to terminate the
connection�
• “CLR DOWN” is displayed�
• “
” disappears�
L Either station can send a Clear Down signal�
D Receiving a Group call
When a Group call is received:
• The Status indicator lights green�
• “ ” may be displayed or blink, depending on the
presetting�
• “ ” is displayed and the mute is released�
• The Group name (or ID) is displayed while receiving
the signal�
Group C
Call Scan
1� Hold down [PTT] to speak�
NOTE: Only one station can speak at a time�
2� Release [PTT] to receive�
3� After the communication is finished, push [Back]
to send a Clear Down signal to terminate the
connection�
• “CLR DOWN” is displayed�
• “
” disappears�
L Any station can send a Clear Down signal�
D Receiving a Status Message
When a Status Message is received:
• Beeps sound�
• “ ” blinks�
• May vibrate, depending on the presetting�
• The Status Message and the calling station or Group
name (or ID) are alternately displayed�
RX Status 01
Call Scan
Push [Back] to stop the display indication�
D Receiving a Message
When a Message is received:
• Beeps sound�
• The Message and the calling station or Group name
(or ID) are alternately displayed�
• “ ” blinks�
• May vibrate, depending on the presetting�
Go to Area 1
Call Scan
Push [Back] to stop the display indication�
D Receiving an Emergency call
When an Emergency call is received:
• Beeps sound�
• The Emergency text and the calling station name (or
ID) are alternately displayed�
• “ ” blinks�
• May vibrate, depending on the presetting�
Emergency
Call Scan
1� Hold down [PTT] to speak�
2� To stop the beep and display indication, turn OFF
the transceiver, change the channel, or push
[PTT] or a key�