Operation Manual
Table Of Contents
- IMPORTANT
- Section 1 ACCESSORIES
- Section 2 PREPARATION
- Section 3 BASIC OPERATION
- Section 4 ADVANCED OPERATION
- Section 5 SCAN OPERATION
- Section 6 MENU SCREEN
- Section 7 NXDN™ OPERATION
- NXDN™ system operation
- Transmitting a call
- Receiving a call
- Roaming function (For Multi-site Trunking operation)
- Site Lock function (For Multi-site Trunking operation)
- Site Select function (For Multi-site Trunking operation)
- Incoming list
- Outgoing list
- Encryption function
- Over The Air Programming (OTAP) function
- Section 8 MDC 1200 SYSTEM OPERATION
- Section 9 BIIS 1200 SYSTEM OPERATION
- Section 10 VOICE RECORDER FUNCTIONS
- Section 11 Bluetooth® OPERATION
- Bluetooth® Wireless Technology operation
- Turning ON the Bluetooth® function
- Pairing with a headset or a data device
- Headset settings
- Accepting a pairing request from a Bluetooth® device
- Disconnecting from a Bluetooth® device
- Deleting a Bluetooth® device from the pairing list
- Resetting the installed Bluetooth® unit
- The maximum number of paired devices
- Section 12 OTHERS
- Section 13 OPTIONS
8
MDC 1200 SYSTEM OPERATION
8-3
D Transmitting a PTT ID call
You can transmit a call with your station ID�
When another station receives a PTT ID call, your
station ID is displayed�
Push [PTT] to make a call�
• Beeps sound, depending on the presetting�
• Your station ID is transmitted when you push [PTT] (at the
beginning of the transmission) or release [PTT] (at the end
of transmission), depending on the presetting�
D Transmitting an MDC Emergency call
An MDC Emergency call can be transmitted in the
same way as the 2-Tone, 5-Tone, or NXDN
TM
signaling
operation� See “Emergency call” for details� (pp� 4-3 ~
4-6)
The transceiver can also be set to keep the
microphone open in the Emergency mode to monitor
the situation, depending on the presetting�
D Transmitting an MDC Emergency
Acknowledgment
When receiving an MDC Emergency call, an MDC
Emergency Acknowledgment is automatically
transmitted, depending on the presetting�
Transmitting a call