Operation Manual
Table Of Contents
- IMPORTANT
- Section 1 ACCESSORIES
- Section 2 PREPARATION
- Section 3 BASIC OPERATION
- Section 4 ADVANCED OPERATION
- Section 5 SCAN OPERATION
- Section 6 MENU SCREEN
- Section 7 NXDN™ OPERATION
- NXDN™ system operation
- Transmitting a call
- Receiving a call
- Roaming function (For Multi-site Trunking operation)
- Site Lock function (For Multi-site Trunking operation)
- Site Select function (For Multi-site Trunking operation)
- Incoming list
- Outgoing list
- Encryption function
- Over The Air Programming (OTAP) function
- Section 8 MDC 1200 SYSTEM OPERATION
- Section 9 BIIS 1200 SYSTEM OPERATION
- Section 10 VOICE RECORDER FUNCTIONS
- Section 11 Bluetooth® OPERATION
- Bluetooth® Wireless Technology operation
- Turning ON the Bluetooth® function
- Pairing with a headset or a data device
- Headset settings
- Accepting a pairing request from a Bluetooth® device
- Disconnecting from a Bluetooth® device
- Deleting a Bluetooth® device from the pairing list
- Resetting the installed Bluetooth® unit
- The maximum number of paired devices
- Section 12 OTHERS
- Section 13 OPTIONS
7
NXDN™ OPERATION
7-12
D Receiving an Individual call
When an Individual call is received:
• Mute is released�
• The Status indicator lights green�
• The calling station name (or ID) is displayed while
receiving the signal�
Station 10
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�
D Receiving a Group call
When a Group call is received:
• Mute is released�
• The Status indicator lights green�
• The Group name and the calling station name (or ID)
are alternately displayed while receiving the signal�
L When an All Call is received, “All Call” is displayed� In
that case, you cannot reply to it�
Group C
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�
D Receiving a Status message
When a Status message is received:
• Beeps sound�
• The Status message and the calling station or Group
name (or ID) are alternately displayed�
• “ ” blinks.*
• “ ” may be displayed or blink, depending on the
presetting.*
• May vibrate, depending on the presetting�
RX Status 01
Call Scan
Push [Back] to stop the display indication�
D Receiving a Message
When a Message is received:
• Beeps sound�
• The Message and the calling station or Group name
(or ID) are alternately displayed�
• “ ” blinks.*
• “ ” may be displayed or blink, depending on the
presetting�
• May vibrate, depending on the presetting�
Go to Area 1
Call Scan
Push [Back] to stop the display indication�
D Receiving a Call Alert call
When a Call Alert call is received:
• Beeps sound�
• “Call Alert” and the calling station or Group name (or
ID) are alternately displayed�
• “ ” may be displayed or blink, depending on the
presetting�
• May vibrate, depending on the presetting�
Call Alert
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�
D Receiving a Radio Check call
When a Radio check command is received,
the transceiver automatically transmits an
acknowledgment call� The RAN code matching may
not be necessary, depending on the presetting�
D Receiving a Remote Monitor call
When a Remote monitor call is received, the
microphone audio is automatically transmitted for the
set time period� The RAN code matching may not be
necessary, depending on the presetting�
Receiving a call