Operation Manual

5
SCAN OPERATION
5-5
You can set or clear a Scan tag to or from a channel in
a Scan list�
The Scan tag channel is a target channel during a
Scan�
In a current Scan list:
1� Select a channel� (p� 3-4)
2� Push [Scan Add/Del (Tag)] to set or clear a Scan
tag to or from the channel�
• “ ” is displayed for a Scan tag channel�
When setting a Scan tag:
Scan Tag
Scan 1
ON
• The screen above is briey displayed.
When clearing a Scan tag:
Scan Tag
Scan 1
OFF
• The screen above is briey displayed.
In a current Scan list:
(Menu > Channel/Scan > Scan Tag)
1� Select a channel� (p� 3-4)
2� Push [Menu] to display the Menu screen�
3� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then push [OK]�
Channel/Scan ►
Signaling/Call ►
Menu
4� Push [P2 (Up)] or [P1 (Down)] to select
“Scan Tag,” then push [OK]�
Scan Tag ►
Scan List ►
Channel/Scan
5� Push [P2 (Up)] or [P1 (Down)] to select a list, then
push [OK]�
✔ SCAN 1
✔ SCAN 2
Scan Tag
When setting a Scan Tag:
Scan Tag
Scan 2
ON
• The screen above is briey displayed.
When clearing a Scan Tag:
Scan Tag
Scan 2
OFF
• The screen above is briey displayed.
6� Hold down [Back] for 1 second to return to the
standby screen�
Setting or clearing a Scan tag