Operation Manual
Table Of Contents
- IMPORTANT
- Section 1 ACCESSORIES
- Section 2 PREPARATION
- Section 3 BASIC OPERATION
- Section 4 ADVANCED OPERATION
- Section 5 SCAN OPERATION
- Section 6 MENU SCREEN
- Section 7 NXDN™ OPERATION
- NXDN™ system operation
- Transmitting a call
- Receiving a call
- Roaming function (For Multi-site Trunking operation)
- Site Lock function (For Multi-site Trunking operation)
- Site Select function (For Multi-site Trunking operation)
- Incoming list
- Outgoing list
- Encryption function
- Over The Air Programming (OTAP) function
- Section 8 MDC 1200 SYSTEM OPERATION
- Section 9 BIIS 1200 SYSTEM OPERATION
- Section 10 VOICE RECORDER FUNCTIONS
- Section 11 Bluetooth® OPERATION
- Bluetooth® Wireless Technology operation
- Turning ON the Bluetooth® function
- Pairing with a headset or a data device
- Headset settings
- Accepting a pairing request from a Bluetooth® device
- Disconnecting from a Bluetooth® device
- Deleting a Bluetooth® device from the pairing list
- Resetting the installed Bluetooth® unit
- The maximum number of paired devices
- Section 12 OTHERS
- Section 13 OPTIONS
4
ADVANCED OPERATION
4-6
• The Stationary Detection function
When the transceiver is detected as being stationary
(no motion) for the ON Timer preset time�
L If a user moves the transceiver during the
Reminder Timer set time, the Emergency mode is
canceled�
Acceleration
Time
Enters the
Emergency mode.
Sends an
Emergency call.
Stationary
Sensitivity
ON Timer
Reminder Timer
Emergency Timer
If moving during the Reminder
Timer, the Emergency mode
is canceled.
No motion is
detected.
• The Motion Detection function
When the transceiver continuously moves for the ON
Timer preset time�
L If a user holds down [Emergency] for the Emer SW
OFF Timer set time, before the Reminder Timer set
time expires, the Emergency mode is canceled�
Motion
Sensitivity
Acceleration
Enters the
Emergency mode.
Sends an
Emergency call.
Motion is
detected.
Time
ON Timer
Reminder Timer
Emergency Timer
[Emergency]
If holding down [Emergency]
during Reminder Timer, the
Emergency mode is
canceled.
Emergency call
D Transmitting an Emergency call (Continued)
The transceiver enters the Emergency mode through
the following functions: