Specification Sheet
Technical Data Sheet
VNET2-Dante Bridge
Ordering Information
Part Number
8001 7240
Specifications
Ethernet
Compliance
100 base T or 1000 base T
VNET
Cable type
Category 5 UTP (or better)
Max. Total cable length
1 km
Max. Network span
1 km
Connector
Standard RJ45
Ext Power
Only to be provided by a Linea Research Accessory Power Supply
via a 3.5 mm Jack-to-Jack lead (Linea Research part no. LD1047)
Power
Consumption
3 W max.
Analog Audio
Connector
3-Pin locking male XLR
Frequency Response
20 Hz to 20 kHz +-0.2 dB
THD
<0.005% typ. At 1 kHz
Dynamic range
114 dB (A weighted)
Max. output level
+10 dBu into 600 ohms
Environmental
Temperature
0 to +45°C
Humidity
0 to 80% RH (non-condensing)
Physical
Dimensions (HxWxD)
43 x 115 x 115 mm (1.7 x 4.5 x 4.5”)
Weight
0.5 kg (1.1 lbs)
Notes:
A full range of measurements and performance data
can be downloaded from www.tannoy.com. For
project-specic system design assistance, contact
our AET Group via www.aetgroup.tc
New materials or manufacturing methods introduced
through Tannoy’s policy of continuous research
and development may result in variances; however,
performance will meet or exceed published
specications, which Tannoy reserves the right to
alter without prior notice.
Copyright (c) 2012 Tannoy Limited. All rights reserved.
tannoy.com/pro
V 1.00 - 20/02/2013