User Manual

7 of 11
Product Information Document
8 Channel Dual-Mode Compressor/Gate with
iTS Hysteresis and Flexible Channel Linking
Compressors/Limiters
SQ1D
Technical Speci cations
Technical Speci cation
Inputs
Input impedance 10 kΩ
Maximum input level +22 dBu
CMRR -80 dB at 1kHz (typical)
Connectors 3-pin female XLR
Outputs
Output impedance <60 Ω
Min load 2 kΩ
Maximum output level +22 dBu @ 1 kHz
Connectors 3-pin male XLR
External Key Input
Input impedance 10 kΩ
Maximum input level +22 dBu
CMRR -60 dB at 1kHz (typical)
Connector ¼ " TRS
Solo Bus Input
Input impedance 10 kΩ
Maximum input level +22 dBu
CMRR -60 dB at 1kHz (typical)
Connector 3-pin female XLR
Solo Bus Output
Output impedance <60 Ω
Min load 2 kΩ
Maximum output level +22 dBu @ 1 kHz
Connectors 3-pin male XLR
Performance
Frequency response ±0.5 dB (Input to Output), 20 Hz to 20 kHz
Dynamic range >117 dB (22 Hz to 22 kHz unweighted)
Noise floor <-95 dBu (22 Hz to 22 kHz unweighted)
Compressor
Threshold -50 dB to +25 dBu
Ratio ∞ to 1:1, with scale markings 5:1 and 2:1
Attack 100 μs to 20 ms
Release 50 ms to 2.5 s
Make-up gain 0 dB to +30 dB
Gate
Threshold -50 dB to +25 dBu
Range -∞ to 0dB
Attack 10 μs to 10 ms
Release 2 ms to 2 s
Hold 2 ms to 2 s
Sidechain Bandpass  lter
Frequency range 40 Hz -16 kHz
Terminations
Audio 3-pin XLR and 1/4" TRS jack
Power 3-pin IEC