User Manual

10 of 11
Product Information Document
8 Channel Dual-Mode Compressor/Gate with
iTS Hysteresis and Flexible Channel Linking
Compressors/Limiters
SQ1D
The dynamics processor shall have input and output XLR connectors and a ¼ " TRS jack socket for the external side chain input for each channel.
All audio connections shall be electronically balanced.
The dynamics processor shall include an auto-ranging universal switch-mode power supply for use on a worldwide basis.
The dynamics processor shall be housed in a standard 3U 19" rackmount chassis, and shall be 483 mm wide x 227 mm deep x 133 mm high
(19.0" x 8.9" x 5.2"), with nominal weight 4.7 kg (10.3 lbs). The dynamics processor shall be installed in a rack frame or road case capable of safely
supporting its weight. Input, output, and power connections shall be made at the rear panel of the dynamics processor. Installers shall allow
adequate space at the rear for connection and disconnection of input, output, and power connections. The power requirements shall be 100 to
240 VAC, 50 to 60 Hz.
The dynamics processor shall be the KLARK TEKNIK model SQ1D and no other alternative shall be acceptable.