User Instructions

13
ZCTBTSR9050 (02/21)
3. Press the Function Button (B) until it cycles to the
“AUX” function on the control panel
4. Play music from your connected device
Using AM/FM radio
Ensure the radio antenna is properly installed.
1. Press Power ON/OFF (A) to turn on the speaker
2. Push the function button (B) to select the FM or FM.
3. Press the Play/Pause (F) or Back/Tune (C) Buttons to
move up and down the band. (Note: if “P” is displayed
, press Next/Tune Button (E) to toggle out of “P”
(Preset) being displayed
4. Press , hold , and release the Play/Pause (F) or Back/
Tune (C) Buttons to search for next station in range.
Press , hold , and release the Play/Pause (F) or Back/
Tune (C) Buttons again for next station in range.
5. Press, hold, and release the Next/Tune button
(E),the”P” indicator will appear on display and will
begin to flash. The unit will autoscroll through the
bands and auto save all stations in range, 50 radio
stations can stored automatically.
6. After preset stations are stored, press the Next/Tune
(E) button. The display will show “P” and “P01” Press
Play/Pause (F) or Back/Tune (C) Buttons to scroll
through the preset stations
Using the TWS:
(Chain two CTBTSR9050
Speakers Together)
The TWS chaining feature will only work on CTBTSR9050
speakers
Only two CTBTSR9050 speakers can be chained together
1. Make sure both CTBTSR9050 are powered on and in
Bluetooth pairing mode
2. Connect your Bluetooth device to one of the speakers
and wait for an audible confirmation.
3. Press the Bluetooth Pair Button (G) on the unit and
accept CTBTSR9050 on you external device
4. The BT indicator light on the unit will turn solid and an
audible confirmation, you are now connected.
5. Press the Bluetooth Pair Button (G) again. “TWS”
indicator will display and flash.
6. Press the Bluetooth Pair Button (G) on another
CTBSR9050, This will connect automatically. TWS
indicator will turn solid and an audible confirmation
“Right Channel” and “Left Channel” will sound, “BT”
will appear on one unit and “SL” will display on the
other unit.
7. Play music from your connected device.
Adjusting the Volume
1. Volume can be adjusted on your connected device or
by turning the volume control knob (H) of the
CTBTSR9050
2. Once you have reached MAX volume of the
CTBTSR9050, an audible “beep” will be heard to note
MAX volume has been reached
CAUTION:
Playing music too loud over an extended period can
cause permanent hearing damage.
Playing a Track
• To play an audio track press the Play/Pause Button (F)
• To pause an audio track press the
Play/Pause Button (F)
Changing the Track
• To advance a track press the Next/Tune Button (E)
• To go to a previous track press the
Back/Tune Button (C)
Standby function:
• The CTBTSR9050 has a built-in power saving
system, which will automatically put the unit into a
“standby mode”, when it detects that, the unit is not
in use for 5 minutes.
• To exit “standby mode” press the Power ON/OFF(A)
on the speaker
Using the USB Charging
Ports:
• The CTBTSR9050 has two onboard 5V 2.1 Amp USB
ports designed to charge devices (I).
• To charge a device plug the device end of the USB
cord into the device
• Plug the USB end into the USB ports (I)
• Turn on power (A)