User Manual

WARNING:

BEFORE USAGE, THE INSTRUCTION

MUSE BE READ.

DO NOT POINT AT PEOPLE OR ANIMAL.

GUN AND GAS MUST NOT BE PLACED IN

AREA WHERE TEMPERATURE IS OVER 40 ℃

PLACE IN GUN CASE WHEN NOT IN USING OR

TRANSPORTING

UNAUTHORIZED RECONSTRUCTION OF AIR

SOFT GUN TO STRENGTHEN FIRING FUNC

TION IS STRICTLY PROHIBITED.

DO NOT USE GAS WHICH PRESSURE IS OVER

12 Kgs/c㎡

BE CAREFULL WHAT TARGET YOU SHOOT

THANK YOU FOR PURCHASING. THE FOLLOWING ATTENTION POINTS AND INSTRUCTIONS MUST

BE READ. SHOOTING WITHOUT CAUTION OR USED IMPROPERLY, BLINDNESS OR INJURIES COULD

BE LEAD.

PAGE 1
WARNING: BEFORE USAGE, THE INSTRUCTION MUSE BE READ. THANK YOU FOR PURCHASING. THE FOLLOWING ATTENTION POINTS AND INSTRUCTIONS MUST BE READ. SHOOTING WITHOUT CAUTION OR USED IMPROPERLY, BLINDNESS OR INJURIES COULD BE LEAD. DO NOT POINT AT PEOPLE OR ANIMAL.
PAGE 2
EYE PROTECTION DEVICE MUST BE EQUIPPED DO NOT LOAD ANYTHING BUT BB BULLETS. DO NOT LOOK THROUGH THE BARREL PLEASE SHOOT IN SAFE PLACE OPERATION 1.REMOVE THE MAGAZINE 2.FILLING GAS PRESS MAGAZINE CATCH AND REMOVE MAGAZINE FILL THE GAS BOTTLE TO THE MAGAZINE IN VERTICA DIRECTION.
PAGE 3
.LOAD BB BULLETS 6.FIRE LOAD BULLETS PULL THE TRIGGER. 7.SAFETY 4.INSERT MAGAZINE SAFETY OFF(READY FOR FIRE) 5.LOAD PULL THE SLIDE COMPLETELY TO THE REAR.
PAGE 4
DISASSEMBLY 4.REMOVE THE BARREL 1.REMOVE THE SLIDE STOP 2 3 1 PRESS MAGAZINE CATCH AND REMOVE MAGAZINE.MOVE THE SLIDE REAR UNTIL THE TAKEDOWN NOTCH IS JUST ABOVE THE SLIDE STOP TAB AND REMOVE SLIDE STOP 2.REMOVE THE SLIDE 3.REMOVE THE RECOIL SPRING AND SPRING CAP ASSEMBLY REVERSE THE DISASSEMBLY ORDER ADJUST TREJECTORY TWIST THE ADJUST DIAL TO ADJUST TEAJECTORY.
PAGE 5
KP-08 EXPLODED DRAWING
PAGE 6
No.
PAGE 7
KP-08 MANUAL
PAGE 8
KJWORKS kjworks.com.tw Kjworks No.