Quick Start Guide

2 1 3 4
V1.0
LawMate, innovation never stops
®
1. Name and Parts
2. Package Content
5. Charging the Battery
1. Volume Up Button
2. Speaker Power On/Off Button
Green LED(Charging)
3. Previous Track Button
4. Light Green LED(IP)
5. Blue LED(DVR Power On)
6. Red LED(Recording)
7. Orange LED(P2P)
8. Next Track Button
9. Volume Down Button
3
4
1
5
2
7. Date and Time Setting
3. Operation
9. Download videos to PC
With memory card inserted in the device, connect
it to PC with USB cable. Power on the device and
the removable disk of the memory card will
appear on your PC for you to view and
download video files.
PV-BT10i
1080P
Bluetooth Speaker IP DVR
Quick Guide
a
b
4GB
Lock
Adapter
c
LawMate, innovation never stops
®
PV-Cam Viewer
for IP Cam
App Store/Play Store
Installation Quick Guide
6
7
8
9
10
11
12
13
14
15
10. Memory Card
11. Micro USB Connector
12. DVR LED Switch
13. Lens
14. Power Off/Bluetooth On/DVR On
Switch
15. Default Key
Bluetooth Speaker(w/o DVR function)
1.Switch to “ BT ” and long press to turn on the
power. You will hear “Power On” from the device.
2. When the device is turned on, the blinking Blue LED
shows that the speaker is ready to pair with mobile device.
Go to your mobile device and turn on the Bluetooth.
You will find the name “PV-BT10” on your mobile device
and you can pair your mobile device to the speaker.
3. Once the device is connected to the speaker, the Bluetooth
status indicator on the speaker changes from blinking blue
to solid blue LED and you will hear ”Connected”.
4. Understanding the control button
4.1.V- : Decreases speaker volume. Press and hold to
continuously decrease the volume
4.2.V+: Increases speaker volume. Press and hold to
continuously increase the volume
4.1. : Skip forward to the next track.
4.2. : Skip backward to the previous track.
4.3. : Short press to pause the music and short press again
to resume music.
Long press to turn off the speaker.
*Warranty will be void if the serial number sticker is tampered.
*If the speaker is not connected to any device,it will power off after
3 minutes of idle time.
DVR
1.Switch to the right “V” and long press .
After 40 seconds of system initialization, the DVR will be on.
2. When the DVR is turned on, the blinking orange LED
shows that the DVR is ready for IP connection.
For more WiFi/IP connection instruction, please refer to PV
Cam Viewer Quick Guide for more details.
3. To disable the DVR LED indicator, please switch to “OFF”.
14
14
● Solid blue LED - power on
● Solid red LED - recording on
● Blinking orange LED - searching for Wi-Fi connection
● Solid orange LED - device connected to phone (P2P connected)
● Solid green LED - device connected to the router (IP connected)
4. LED Indicator
Connect the micro USB end of the cable to and
connect the other end to an USB power source, or plug
it to a power bank of your own choice. The power bank
then works as an extra battery. When charging is complete,
the three blue LEDs will all be on.
11
6. Format Memory Card
Go to the Program Setting on the PV Cam Viewer App to format
the memory card.
Go to the Program Setting on the PV Cam Viewer App to
change the date and time setting.
8. Recording Mode
Go to Recorder Setting on the PV Cam Viewer App to change
the recording mode to continuous recording or motion detection
recording.
User's manual
12
2
V1.0
LawMate, innovation never stops
®
PV-BT10i
1080P
Bluetooth Speaker IP DVR
Quick Guide
USB cable
Memory card
2
● Blinking blue LED - Bluetooth ready to pair with mobile device
Built-in image sensor 1/2.9" progressive CMOS sensor
Sensor resolution 2000x1121
Sensor sensitivity 0.1 Lux @ F 2.0
Lens F/No. F 2.0
Focal Length 3.64
Angle of View 78°
Algorithm H.264, JPEG
File Format MOV, JPG
Video recording mode Auto/Manual/Motion Detection
Recoreding Capability 1920x1080, 1280x720, 848x480
Frame rate Up to 30 fps
Photo Capability 2M(1600*1200)
WIFI Built-in WIFI Module
Memory type Micro SD Card ( Support SDHC max. 32GB)
Data interface Card Reader
Dat
e/Time Table YYYY/MM/DD, HH:MM:SS
Snapshot recording and playback video
Power Input DC 5V
Power Consuption 480mA-530mA(WiFi ON)，BT+(20-380mA)
Battery Input DC 3.7V / 1400 mA polymers battery(XK504355)
Charging Time 180min(560mA)
150min(1080P)BT OFF
165min(720P)BT OFF
180min(WVGA)BT OFF
Recording time 500min @ 1920x1080 resoultion ( 16GB SD card )
Dimension 86X86X54(mm)
Weight 345G
Misc.
Power
Physical
Video Spec.
Storage & I/O
WIFI
Battery Lifetime
10. Specification