Manual
7
13. Fuel Safety.
WARNING:
This product requires unleaded petrol and 2-stroke oil, ratio 40:1.
a) Always handle fuel with care. It is highly flammable.
a) Use only an approved container for fuel storage and mixing.
b) Never mix petrol/ oil in the machine fuel tank.
c) Do not smoke, and avoid sparks and flames near fuel or unit.
d) Avoid spillage of fuel or oil. Wipe up all spillages as quickly as possible.
e) Mix fuel outdoors where there are no sparks or flames.
f) Do not inhale fuel fumes.
g) Move at least 3 metres (10 feet) from refueling position before starting the
engine. Stop the engine and allow to fully cool before refueling or storing the
machine.
h) Never use exposed light bulbs while refueling.
i) Change your clothes if you spill fuel on yourself.
j) Keep petrol and oil away from eyes. If petrol or oil comes in contact with eyes,
wash them immediately with clean water. If irritation is still present, seek
immediate medical help.
14. Transport, handling and storage of the unit
a) Switch off the engine when you cross roads or gravel paths.
b) Always clean and maintain before storing, pay special attention to the guards
and cutting attachments.
c) Before transporting the unit in a vehicle - stop the engine and allow it to cool.
Empty the fuel tank and securely locate the unit.
d) When removing the tool from a vehicle or from storage, be careful not to drop
the engine on the ground as this may severely damage the fuel tank.
e) Never drag the tool across the ground, or throw it to the ground - this is highly
dangerous and will damage the fuel tank, causing the fuel to leak, possibly
causing fire.
f) Remember when moving the equipment to lift it up entirely from the ground.
g) Carry out cleaning and maintenance before storage, including replacement of
guards on cutting attachments.
15. Start and commissioning of the unit
a) For units with a clutch, check that the cutting attachments stop turning when
the engine is at idle speed.
b) Read instructions on filling of fuel and oil, especially concerning fire precautions