Manual

22
6) Insert each end of the cutting lines through the eyelets in the cutting head and
locate the spool over the spindle. (See Fig. Z)
Fig. Z
7) Once the spool is in place, apply pressure on the spool and compress the
spring. Pull each end of the lines sharply to unlock the line from the slots.
8)
Continue to apply pressure to the spool until the knob can be threaded anti-
clockwise onto the spindle. Tighten the bump head knob securely (See Fig. AA&AB).
Fig. AA Fig. AB
7. FUEL CAP
A leaking fuel cap is a fire hazard and must be replaced immediately.
The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel
filter will cause poor engine performance. If performance improves when the fuel
cap is loosened, check the valve to see if it is faulty and also check the filter for
clogging, then tighten the fuel cap to check if the performance improves. If not
replace the fuel cap.
8. SPARK PLUG
The spark plug must be cleaned or replaced every 20 hours to ensure proper
performance of your product.