Manual

20
Clean the filter in the oil.
When filling the filter cover, put the choke lever to the middle position.
4. CUTTING-LINE HEAD
The cutting-line head containing nylon monofilament line, a guard and a cutoff knife
as standard equipment. The guard’s cutoff knife automatically removes any excess
line that is released from the cutting head. A protective cover is used over the cutoff
knife. Remove this protective cover before
operating. (See Fig. U)
Nylon monofilament line is suitable for
cutting grass and ordinary weeds, but not
for cutting brush and woody growth.
5. EXTRACTION OF NYLON LINE
The nylon line can be cut off by debris or by coming into contact with solid parts,
on these occasions follow this procedure to extend the cutting line.
1) Stop the engine and wait until the spool has stopped.
Push rim of coil, turn it a little to the left, then to the right.
2) Pull out both nylon lines until the line is long enough to be cut off by the line
cutting blade.
6. REPLACING NYLON LINE
NOTE: Stop the engine and wait until the spool has stopped.
1) Clean any mud, dirt, debris, etc, from the area around the trimmer head;
otherwise, it will make it more difficult to service.
2) Remove bump head knob by turning anti-clockwise. Remove the spool and
spring from spindle. (See Fig. V)
Fig. V
Fig. U