Manual
17
2.3
Press the priming bulb repeatedly until fuel can be seen in the clear plastic fuel return
tube (a). (See Fig. N1, N2)
Fig. N1 Fig. N2
2.4 With your left hand, hold the machine. With your right hand, pull the starter
lightly until you feel resistance, then pull briskly. Return the starter gently. Pull
starter grip 5 times, until engine tries to run.
2.5 Set choke lever to half choke position “
” (See Fig. O), pull starter grip
until the engine starts. (See Fig. Q)
Allow the engine to warm up for 2 minutes after a cold start. Squeeze
throttle trigger and then release it, the chock lever will move to the “ ”
position automatically. (See Fig. P)
Fig. O
Fig. Q
Fig. P
3) Starting a warm/flooded engine
3.1 Place the On/Off switch to the” I”position.
3.2 Move the choke to the “ ” position.