Manual

14
Position the guard on the cutting head and fix it with four screws (See Fig. J)
Check whether the guard is properly fitted and secure.
Fig. J
OPERATION
1. FUELING
Safety Tips for Fueling
1) Always handle fuel with care. It is highly flammable.
2) Always refuel outdoors where there are no sparks and flames.
3) Do not inhale fuel vapors.
4) Do not let petrol or oil come into contact with your skin.
5) Keep petrol and oil away from the eyes. If petrol or oil comes in contact with the
eyes, wash them immediately with clean water. If irritation is still present, seek
immediate medical help.
6) Clean up spilled fuel immediately. Always store fuel in an approved container.
Mixing fuel and oil
WARNING! Read ‘’Safety Tips for Fueling’’ before you begin.
Th
is engine is designed to operate on unleaded petrol. This product
requires pre-mixed petrol and good quality synthetic 2-stroke air-cooled
eng
ine oil. Pre-mix unleaded petrol and 2-stroke oil in a separate container (not
supplied). Pre-mix at a ratio of 40:1 (40 parts petrol to 1 part oil).
DO NOT USE automotive or marine oil. These oils will cause engine
damage.
Mix the fuel thoroughly each time and when refueling.
Mix in small quantities. Do not mix a quantity that is larger than can be used in a