Operation Manual

22 23
4. Copy the les that you want to your PC.
How to use the PC camera function
1. Connect one end of the supplied USB cable to the camera’s
micro USB jack (4), and the other end to the PC’s USB port
and turn the camera on.
2. Turn on the camera, then press the MODE button (10) to
switch from ‘Mass Storage’ mode to ‘PC Camera’.
3. If using Windows XP, Open [My Computer], double click ‘USB
video tool’. If using Window Vista, 7 or 8, the PC Camera
function can only be used with third-party software
(Skype, etc.)
Waterproof case
The Splash action camera includes a case that is waterproof
up to 15 metres. When using the camera in a wet environment,
always use the waterproof case.
Using the waterproof case
1. Open the waterproof case (11) by releasing the clip (12) on the
side of the case.
2. Insert the camera correctly so that the case closes easily
and provides a tight seal.
3. Snap the clip (12) shut to ensure the case is waterproof.
4. To operate the camera, use the waterproof POWER/
SHUTTER button (13).
Note: The other functions and buttons of the camera cannot
be used whilst in the waterproof case. Access these buttons/
functions before inserting the camera into the case, or make
sure the case is thoroughly dried before removing the camera.