Data Sheet

Name Description

0V 0V / ground

3V 3V / positive supply

SDA Serial data pin connected to the magnetometer & accelerometer

SCL Serial clock pin connected to the magnetometer & accelerometer

DIO General purpose digital IO (P16 in editors)

MOSI Serial connection - Master Output / Slave Input

MISO Serial connection - Master Input / Slave Output

SCK Serial connection - Clock

PAD2 General purpose digital / analogue IO (P2 in editors)

DIO General purpose digital IO (P12 in editors)

BTN_B Button B – Normally high, going low on press (Button B in editors)

COL3 Column 3 on the LED matrix

COL7 Column 7 on the LED matrix

DIO General purpose digital IO (P8 in in editors)

PAD1 General purpose digital / analogue IO (P1 in editors)

COL8 Column 8 on the LED matrix

COL9 Column 9 on the LED matrix

BTN_A Button A – Normally high, going low on press (Button A in editors)

COL2 Column 2 on the LED matrix

PAD0 General purpose digital / analogue IO (P0 in editors)

COL1 Column 1 on the LED matrix

Edge Connector Pinout

Note: A number of these pins may not

be accessible in all editors.

Special function pin

Digital input / output

Analogue input / digital IO

Digital input (shared with a button)

Digital output (shared with LED matrix)

Edge Connector Breakout Board for the BBC micro:bit

www.kitronik.co.uk/5601B

Breakout PCB Ref (if applicable)