Data Sheet

WS2812B LED
Intelligent control LED integrated light source
8/9
WS2812B Products Using Instructions
MSL=5A Level
1. Purpose
：
WS2812B-Mini LED lamp’s surface use the high hardness silicone resin,can ensure that no
matter customers use PU glue or epoxy resin to do the silicone drop rubber
processing,won’t lead the LED to die;also has a very good anti sulfide capacity. Good
compatibility with bracket, but the silicon resin has a higher requirements on the humidity
and dehumidification process, especially pay attention during wet season,ensure the
production safety.
2.
Transport and application area
：
All WS2812S/B products during the transportation process, need to maintain a positive
upward, moisture-proof, during the transport process,shall avoid the extrusion, collision
and vibration.
3.
Product storage and deadline
：
Sealed storage at room temperature: 20
℃
~ 30
℃
, 40% ~ 60%RH, the product is valid
for 3 months;
Moisture seal storage: 20
℃
~ 30
℃
, 25% ~ 60%RH, the product is valid for 6 months;
After opening the product packaging , suggest using them within 1 hours,(environmental
conditions of temperature <30
℃
, humidity <60%).
4. Dehumidification process:
LED products which is beyond the prescribed time limit,or for getting damp for some other
reasons,we recommend the customer first do the dehumidification process,then use
them.Dehumidification method:under 75
℃
/ 22 ±2 hours.
5.
E
lectrostatic protection:
LED is the electrostatic sensitive devices, although the LED product has excellent
anti-static ability, but after each ESD impact, will cause a certain degree of damage to LED.
Thus in using process of LED products, must do the electrostatic protection measures, such
as anti-static gloves, anti-static Bracelet etc..
6. Manual welding operation instruction
Suggest using the Electric soldering iron whose power is less than 30W, then control the