Data Sheet

24
WHAT THIS MEANS
CODE :MOVE MINI TO MOVE
8
DRIVE IN A STRAIGHT LINE
NOTE: Because the servos are mounted on opposite sides of the :MOVE
mini, one has to turn clockwise (Value 0), and one anti-clockwise (Value
180) to drive the :MOVE mini in a straight line.
NOTE: If the move mini does not
travel in a straight line then you
can adjust the values to make
the servos run at the same
speed. You may also need to
adjust the trimmer (see pg 17).
STEP 1: Create this code.
When button A is pressed, drive full speed
forwards. When button B is pressed, drive full
speed backwards.
UploadDownload
STEP 2: