Data Sheet

ManualsBrandsKitronik Manualsmicro:bit AccessoriesKitronik MOVE Mini Robot Kit (w/o micro:bit)

22

ATTACHING ELECTRONICS

7

STEP 1: Plug the servo cables back into the

SERVO:LITE board. The left servo should plug

into the left-hand side of the :MOVE board and

vice versa. The cables should be threaded

down the gaps on either side as shown and

any excess tucked under the pen mounting

plate.

STEP 2: Clip the SERVO:LITE

board under the hooks on the

inner side plates and slide it

between the outer plates.