Manualshelf

Data Sheet

ManualsBrandsKitronik Manualsmicro:bit AccessoriesKitronik MOVE Mini Robot Kit (w/o micro:bit)
11121314151617181920
4
www.kitronik.co.uk
13
BUILDING THE WHEELS
3
2x
STEP 1: Screw the 2 larger screws from the servo packet, through the
wheel and into the appropriate holes in the servo attachment. The centre
of the horn and the centre of the wheel should be aligned. Press fit the
wheel onto the servo and repeat for the opposite side.
NOTE: The screws should go through the holes shown above in red.