Data Sheet

Layout and Dimensions:
BBC micro:bit
compatible screw
connections
On Off switch
Connecting a BBC micro:bit:
The board has been designed so that the BBC micro:bit can be bolted to
the front, using the supplied spacer and 5 M3x8 countersunk machine
screws.
Examples of board in use: This breakout board is used in our :MOVE mini
robot. For more details see: www.kitronik.co.uk/movemini
Servo 2 connector:
Top Pin: GND
Middle Pin: +V
Bottom Pin: Signal
Servo:Lite Board for the BBC micro:bit
www.kitronik.co.uk/5623
Link pads
and cut on
reverse to
use Servo 3
Servo 1 connector:
Top Pin: GND
Middle Pin: +V
Bottom Pin: Signal
Servo 3 pads:
Top Pad: Signal
Middle Pad: +V
Bottom Pad: GND
Battery Cage
for 3 AAA
batteries
52 mm
54mm
The Servo:Lite™ board for the BBC micro:bit allows two servos to be driven
simultaneously, making it ideal for designs such as buggies. It also has 5 ZIP™
colour addressable LEDs.
The board includes an integrated nut and bolt connection for the BBC micro:bit
pins 0, 1, and 2. P0 is routed to the ™ LEDs, P1 to Servo 1, and P2 to Servo 2
The board also produces a regulated supply that is fed into the 3V and GND
connections to power the connected BBC micro:bit, removing the need to
power the BBC micro:bit separately.
5 ZIP™ LEDs
ZIP™ LED expansion
pads:
Top Pad: DOut
Middle Pad: +V
Bottom Pad: GND
The Servo:Lite™ board is 16mm front to back
Cut track
between pads
and link on
front to use
Servo 3