Data Sheet

MicroPython Editor Code
:GAME ™ 64 for the BBC micro:bit
www.kitronik.co.uk/5626
from microbit import *
import neopixel
import music
# Enable ZIP LEDs to use x & y values
def zip_plot(x, y, colour):
zip_led[x+(y*8)] = (colour[0], colour[1], colour[2])
# Function to play tune on buzzer and run motor for 500ms
def hit_edge():
music.play(music.BA_DING, pin2, False)
pin1.write_digital(1)
sleep(500)
pin1.write_digital(0)
# Setup variables and initial ZIP LED display
zip_led = neopixel.NeoPixel(pin0, 64)
sprite_x = 3
sprite_y = 3
# Colours: Red, Yellow, Green, Blue, Purple, White
colours = [[20, 0, 0], [20, 20, 0], [0, 20, 0], [0, 0, 20], [20, 0, 20], [20, 20, 20]]
sprite_colour = colours[3]
zip_plot(sprite_x, sprite_y, sprite_colour)
zip_led.show()
# While loop to run forever
while True:
# Check button presses
if pin8.read_digital() == 0 and sprite_y == 0:
hit_edge()
elif pin8.read_digital() == 0 and sprite_y != 0:
sprite_y = sprite_y - 1
if pin14.read_digital() == 0 and sprite_y == 7:
hit_edge()
elif pin14.read_digital() == 0 and sprite_y != 7:
sprite_y = sprite_y + 1
if pin12.read_digital() == 0 and sprite_x == 0:
hit_edge()
elif pin12.read_digital() == 0 and sprite_x != 0:
sprite_x = sprite_x - 1
if pin13.read_digital() == 0 and sprite_x == 7:
hit_edge()
elif pin13.read_digital() == 0 and sprite_x != 7:
sprite_x = sprite_x + 1
if pin15.read_digital() == 0:
if colours.index(sprite_colour) - 1 < 0:
sprite_colour = colours[0]
else:
sprite_colour = colours[(colours.index(sprite_colour) - 1)]
if pin16.read_digital() == 0:
if colours.index(sprite_colour) + 1 > 5:
sprite_colour = colours[5]
else:
sprite_colour = colours[(colours.index(sprite_colour) + 1)]
# Clear and redisplay the ZIP LEDs after each button press check
zip_led.clear()
zip_plot(sprite_x, sprite_y, sprite_colour)
zip_led.show()
# 100ms pause before restarting the while loop
sleep(100)
This program was created in the MicroPython Mu Editor for the BBC micro:bit. It provides exactly the same functionality as the MakeCode Blocks program.