STAY ON TRACK WITH THIS :MOVE LINE FOLLOW BOARD FOR BBC MICRO:BIT For :MOVE mini Mk2
BUILD INSTRUCTIONS NOTE: This kit includes fixings for both the original :MOVE mini and :MOVE mini Mk2, so there may be spare components left over after the build. 1 To use the Line Following board with the Interface board, first complete the build instructions provided with the Interface Board. 2 For use with the :MOVE mini, see the following page. If you wish to use this board separately, connect the Line Follow Board to the Interface Board in the order shown.
FOR USE WITH :MOVE MINI NOTE: This instruction book is for :MOVE mini Mk2. If you have an original :MOVE mini, visit www.kitronik.co.uk/5659-mk1. 1 a. Remove the ‘:MOVE’ panel and SERVO:Lite board from the :MOVE mini. b. Using the LONGER two M3 screws and spacers provided, attach the line following board to the underside of :MOVE mini. The shorter screws can be discarded. NOTE: Ensure the larger robot logo is visible from below and the pins are pointing out of the front of the :MOVE mini.
Add line following to your micro:bit robots with the compact Kitronik :MOVE Line Following Board For BBC micro:bit, also fully compatible with :MOVE mini. Example Use STOCK CODE: 5659 TOOLS REQUIRED: - Small Phillips screwdriver INSTRUCTIONS: This booklet contains build instructions. For more detailed resources please visit our website at www.kitronik.co.
