Data Sheet

Protective case for the BBC micro:bit...

is a simple, compact, protective

case for the BBC micro:bit. It’s 4 - layer

construction is easy to assemble and gives

access to all ports and buttons. It also

allows for use with breakout boards and

crocodile clips without having to remove the

BBC micro:bit!

This is not a toy. Children assembling this product should be supervised by a

competant adult. The product contains small parts and should be kept out of reach

of children under three years of age.

Design copyright Kitronik Ltd 2015

Stock code: 5606

NOT INCLUDED:TOOLS REQUIRED:

- Phillips screwdriver

- Flat head screwdriver

- BBC micro:bit

- Battery cage

Protective case for the

BBC micro:bit

• Access all buttons and connections • Holds battery cage

PAGE 1
TM Protective case for the BBC micro:bit... TM is a simple, compact, protective case for the BBC micro:bit. It’s 4 - layer construction is easy to assemble and gives access to all ports and buttons. It also allows for use with breakout boards and crocodile clips without having to remove the BBC micro:bit! TOOLS REQUIRED: NOT INCLUDED: - Phillips screwdriver - BBC micro:bit - Flat head screwdriver - Battery cage TM This is not a toy.
PAGE 2
INCLUDED PARTS / INSTRUCTIONS 1 Assembly instructions 2 3 4 x4 x1 x5 3 Push large screws through part no.1 and lay flat with text facing down. 4 1 3 2 2 1 Screw battery pack into part no.4 with small counter sunk screw. Stack each layer as numbered onto the screws through layer no. 1, then tighten nuts.