Data Sheet

Comus Group of Companies PRODUCT DATA SHEET
FORM AE043 ISS1
SPECIFICATION
Rev. No.
A
Revision Note Signature
Website 2003 NG
PART NUMBER
As part of the company policy of continued product improvement, specifications may change without notice.
Our sales office will be pleased to help you with the latest information on this product range and the details of
our full design and manufacturing service. All products are supplied to our standard conditions of sale unless
otherwise agreed in writing.
©2003 Copyright Comus Group of Companies.
The Comus Group of Companies
consist of:
Assemtech Europe Ltd
Comus International
Gunther Belgium
Gunther France
RBS 04 02 00
TILT SWITCH - Mercury free contacts
NOTE: When cutting or bending switch leads it is impotant that the glass seal is not damaged. The cutting or bending point should be
no closer than 3mm to the glass to metal seal and the lead should be supported between the cutting or bending point and the glass to
metal seal.
Drawings not to scale
All dimensions in mm nominal
CONTACT FORM / STYLE
SWITCHING VOLTAGE
SWITCHING CURRENT
CONTACT RESISTANCE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
CASE MATERIAL
CABLE / TERMINATION
OPERATION LIFE
FEATURES
OTHER MATERIALS
Dependant on position (see above)
24Vdc
25mA
Initial 5Ω max. 10Ω after life test
-25˚C to +70˚C
-40˚C to + 85˚C
Glass Fibre Polyamide, UL94V-0
Pin
100,000 Cycles
Mercury Free Contacts
Terminal:
Copper Alloy, Gold plated over Nickel
Date
5th Dec 03
11
5
2.54
11
6
UP
0.64
2.54
3.5
1.5
10
o
Close
Open
UP
10
10
UNSTABLE UNSTABLE
STABLE
o
o