Datasheet

Record Playback Essentials
www.kitronik.co.uk/2149
Designing the Enclosure
When you design the enclosure, you will need to consider:
 The size of the PCB (below, height including components = 16.5mm)
 How big the battery holder is.
These technical drawings should help you to plan this.
All dimensions are in mm.
Mounting the PCB to the
enclosure
The drawing to the left
shows how a hex spacer
can be used with two bolts
to fix the PCB to the
enclosure.
Your PCB has four mounting
holes designed to take M3
bolts
7
57
65
4 x 3.3mm diameter mounting holes
4
4
LED
13.5
5.5
14
Interface
12
8.5
39.5
Mic
Speaker
20
17
26
57
16