User Guide

11
electrical leak. Before use, check the conditions of all wires and cables.
Advices
• Be sure to well understand all the information contained in this manual. Every operation function or
procedure has to be thoroughly clear.
• Before using any commands (switch, buttons, lever), be sure it is the correct one. In case of doubt, consult
this manual.
Precautions
• The electric cable has to be compatible with the power required by the machine.
• Cables touching the floor or close to the machine need to be protected against short circuits.
Routine Inspection
Advice
When checking the tension of the belts or chains, DO NOT insert your fingers between the belts and the pulleys
and nor between the chain and the gears.
Precautions
• Check the motor and sliding or turning parts of the machine in case of abnormal noises.
• Check the tension of the belts and chains and replace the set when belts or chains show signs of wearing.
• When checking the tension of belts or chains DO NOT inserts your fingers between belts and pulleys, nor
between the chains and gears.
• Check protections and safety devices to make sure they are working properly.
Operation
Warnings
• Do not use the machine with long hair that could touch any part of the machine. This might lead to a serious
accident. Tie your hair up well and/or cover it with a scarf.
• Only trained or skilled personnel shall operate this machine.
• Never touch turning parts with your hands or any other way ,
• NEVER operate the machine without any original safety devices under perfect conditions.
After Finishing the Work
Precautions
• Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket.
• Never clean the machine unless it has come to a complete stop.
• Put all the components back to their functional positions before turning the machine ON again.
• Check the level of liquids.