User Guide

- 10 -
5 minutes before next using.
8.4、Stove Operation
Before using the stove for the first time, please use a mild detergent
to wipe it for cleaning. Do not use corrosive or abrasives detergent.
Turn the burners on about 15-20 minutes before broiling for preheating,
according to the cooking requirement to adjust the flame size.
Notice: Before first preheating, the furnace will smoke rise. This is
because of protective lipids on the grills and other parts are heated, it
is normal, and it will be eliminated after the power up to the maximum for
burning an hour.
8.5、Exchange main fire nozzle to switch gas source
Remove control panel, grill, the pilot light head, and bottom tightening
screw of the end of burner (arc), take out burner, then remove main fire nozzle
with proper open spanner, exchange nozzle of another gas source, then screw
it (Fig.5). Reinstall burner, the pilot light head, grill and control panel
in proper place.
Caution: Each main fire nozzle of the burner has been installed before
delivery, normal use without adjustment but only switching gas. Adjust only
by authorized and licensed technicians. When you change the gas source, you
need exchange the corresponding pressure maintaining valve which installed
on air intake. See 2 in P16.
8.6、Adjust air input
Remove control panel, unscrew damper solid screw(Fig.6), revolve damper
left to right (Fig.7), meanwhile, observe flame and adjust an appropriate
opening degree. Then screw damper solid screw, make sure the equipment will
not get loose in the process of moving and translation. Reinstall control
panel.
Caution: Each burner damper has been adjusted before delivery (once air
input), normal use without adjustment but only switching gas. Adjust only
by authorized and licensed technicians.
Fig.5 Fig.6 Fig.7
9. Cleaning and Maintenance