User Manual

3
Safety Signs and Messages
The following Safety signs and messages are placed in this manual to provide instructions and identify
specific areas where potential hazards exist and special precautions should be taken. Know and
understand the meaning of these instructions, signs, and messages. Damage to the equipment, death or
serious injury to you or other persons may result if these messages are not followed.
This message indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury. It may also be used to
alert against unsafe practices.
This message is used when special information, instructions or
identification are required relating to procedures, equipment, tools,
capacities and other special data.
3) ELECTRICAL SPECIFICATIONS:
1
1
1
The Data plate is located on the front panel.
Power Cord:
Six (6) foot, 3 wire grounded cord. If the supply cord is damaged, the manufacturer, or an authorized
service agent, must replace it in order to avoid a hazard and warranty. Please contact the factory by calling
the 800 # located on the unit.