Installation Instructions

12
Connecting the power/leveling the unit
1. Plug the power cord into its AC outlet, and
push the ice maker back against the wall.
2. Place a level on top of the cabinet. If you
need to relevel the ice maker, follow the
procedure to adjust the front casters, as
outlined in your ice maker's
“Use and Care Guide.”
3. Check the position of the ice maker. If it is
crooked and needs to be adjusted, loosen
the mounting screw and bracket screw (see
the site diagram), position the ice maker as
desired then tighten the screws.
Bracket
mounting hole
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.