Installation Instructions

2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
■ Phillips screwdriver
■ ¼" (6.3 mm) hex
opening screwdriver
■ Measuring tape
Parts supplied
A. Spacer bars (2)
B. Bottom vent (1)
C. ³⁄
8
" hex washer head screws (4)
D. ¾" pan head screws (4)
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■ Cabinet opening dimensions that are shown must be
used. Given dimensions provide minimum clearance
with microwave oven.
■ Recessed installation area must provide complete enclosure
around the recessed portion of the microwave oven.
■ Microwave oven support surface must be solid, level, and
flush with bottom of cabinet cutout. Floor must be able to
support a weight of 90 lbs (41.0 kg).
IMPORTANT: To avoid damage to your cabinets, check with
your builder or cabinet supplier to make sure that the materials
used will not discolor, delaminate, or sustain other damage.
This oven has been designed in accordance with the
requirements of UL and CSA International and complies
with the maximum allowable wood cabinet temperatures
of 194°F (90°C).
Product Dimensions
27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kits
27" (68.6 cm) models
A. 26³⁄
4
" (67.9 cm) overall width
30" (76.2 cm) models
A. 29³⁄
4
" (75.6 cm) overall width
Cabinet Dimensions
27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kits
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet
width
B. 20
7
⁄
16
" (51.9 cm) bottom of
cutout to bottom of upper
cabinet door
C. 40" (101.2 cm) bottom of
cutout to floor (recommended)
D. 25¹⁄
2
" (64.8 cm) cutout width
E. 1¹⁄
2
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 19
7
⁄
16
" (49.4 cm) recommended
cutout height (will fit cutout
height from 19¼" [48.9 cm] to
19¹¹⁄
16
" [50.0 cm])
G. 21
7
⁄
8
" (55.5 cm) min. cutout
depth
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet
width
B. 20
7
⁄
16
" (51.9 cm) bottom of
cutout to bottom of upper
cabinet door
C. 40" (101.2 cm) bottom of
cutout to floor (recommended)
D. 28¹⁄
2
" (72.4 cm) cutout width
E. 1¹⁄
2
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 19
7
⁄
16
" (49.4 cm) recommended
cutout height (will fit cutout
height from 19¼" [48.9 cm] to
19¹¹⁄
16
" [50.0 cm])
G. 21
7
⁄
8
" (55.5 cm) min. cutout
depth
A
B
C
D
A
A
B
C
D
E
F
G
■ Level
■ Drill
■ ¹⁄
8
" (3.2 mm) drill bit