Use and care guide

12
Cleaning mussels and clams in containers*
Choose a suitable container that can enter the tray and that, once inserted, remains at
approximately 1 cm from the closed lid of the packaging machine.
Insert the mussels or clams in the container without exceeding 2/3 of the capability and
don’t put the lid on. Cover the molluscs with a solution of water (1 litre of cold water + 30 g
of salt, well dissolved).
1. Open the lid and take care not to soil or wet the inner part of the tray.
2. Insert the container into the tray and close the lid.
3. Repeatedly press
till you select the Mussel Clam Cleaning cycle.
4. Press
, holding the lid lightly. The cycle is started. An acoustic signal (short beep) is
emitted on cycle start and at the end.
The cycle ends with re-entry of the air into the tray.
5. Open the lid and remove the container.
Marinating in containers*
Meat marinade
Fish marinade
Preparation of vegetables in oil or vinegar
Choose a container suitable to the vacuum, that can enter the tray and that, once inserted,
remains at approximately 1 cm from the closed lid of the packaging machine.
Insert into the container 20 ml of marinating liquid for each 100 g of product and close the
lid of the container.
1. Open the lid.
2. Insert the container into the vacuum chamber and close the lid.
3. Repeatedly press
till you select the Marinade Containers cycle.
4. Press
, holding the lid lightly. The cycle is started. An acoustic signal (short beep) is
emitted on cycle start and at the end.
The cycle ends with re-entry of the air into the tray.
5. Open the lid and remove the container.
Maturation in containers*
Maturation of meats
Drying of soya or wheat gluten
Puffed chocolates
Mousse without air
Choose a container suitable to the vacuum, that can enter the tray and that, once inserted,
remains at approximately 1 cm from the closed lid of the packaging machine.
Insert the product into the container and close it. If the product is a liquid, fill the container
only up to 1/3.
1. Open the lid.
2. Insert the container into the vacuum chamber and close the lid.
3. Repeatedly press
till you select the Aging Containers cycle.
4. Press
, holding the lid lightly. The cycle is started. An acoustic signal (short beep) is
emitted on cycle start and at the end.
The cycle ends with re-entry of the air into the tray.
5. Open the lid and remove the container.
*: Not included into the product