Setup and user guide

2
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the water tank is correctly inserted.
Make sure that the drain hose on the back of the dryer is xed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS AND TIPS”.
Make sure that pockets are empty.
• Open the door and load the laundry. Observe
the maximum load sizes given in the PROGRAMME
CHART.
2. CLOSE THE DOOR
• Make sure that no laundry gets stuck between
door glass and door lter.
• Close the door so that you can hear it click shut.
3. SWITCH ON DRYER
• Press the On/O button. An animation appears on the
control panel, and there is a sound. Afterwards the dryer is
ready to be operated.
FIRST TIME USE
DAILY USE
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
Make sure that no lighters or
matches remain in the laundry.
Make sure that the laundry is
not soaked with flammable
liquids.
When switching on the dryer for the rst time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND INDICATORS / Settings.
WARNING