Installation guide

Clearance Dimensions - Flush Installation
Front View
1" (25mm) r--]/
_SIde Cleats*-_
7/J(22mm)
f_ Platform*
]
[ ]
[
--'B
E
m
Side View
Cabinet
Back
Top View
- E
Side Cleat* --
q_J" 15/8.(4.1o_)
t
27" Models 30" Models
A Width of flush inset cutout (minimum) 271/4'' (69.2 cm) 301/4'' (76.8 cm)
B Height between cutouts (minimum) 21/2'' (6.4 cm) 21/2'' (6.4 cm)
C Height of flush inset cutout (minimum) 103/4'' (27.3 cm) 103/4'' (27.3 cm)
Bottom of cutout to floor (recommended) 81/4'' (21.0 cm) 81/4'' (21.0 cm)
D
Bottom of cutout to floor (minimum) 5" (12.7 cm) 5" (12.7 cm)
E Width of opening (minimum) 251/4'' (64.1 cm) 281/4'' (71.8 cm)
F Depth of cutout (minimum) 253/8'' (64.5 cm) 253/8'' (64.5 cm)
e Recommended outlet location
Flush Installation Requirements
A 25%" (64.5 cm) minimum cutout depth is required.
These dimensions will result in a 1/4"(6 ram) reveal on all sides of the warming drawer.
The front face of the cleats and platforms will be visible and should be treated as a finished surface.