Installation Instructions

4. Mark the three mounting holes through the bottom duct onto

the cutout floor.

5. Using 7/64" drill, drill pilot holes into the three holes marked in

Step 4.

6. Realign and install the bottom duct with three short screws.

7. Using 7/64" drill, drill pilot holes through the four mounting

holes of the bottom duct flange into the bottom front facing of

the cutout/cabinet opening.

Install the Microwave Oven

1. Position microwave oven near cutout opening.

2. Plug in microwave oven.

3. Slide the microwave oven back and into place. The

mounting holes of the rail flanges and bottom duct

flange will align against the bottom front facing of the

cutout/cabinet opening.

4. Secure the microwave oven to the cutout/cabinet by installing

four 123# screws into the mounting holes.

A. Bottom duct mounting holes C. Bottom duct

B. 123# screws (3) D.Cabinet

A. Bottom duct flange

B. Mounting holes

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.