User guide

9
To turn on one of the burners:
1. Turn the corresponding control knob
anticlockwise until the indicator coincides with
the maximum ame symbol
.
2. Press the control knob to ignite the burner.
3. Once the burner has lit, keep the control knob
pressed for about 5 seconds to allow the safety
thermocouple tted to each burner to engage.
The thermocouple will switch o the gas
supply to the burner should the ame be
accidentally lost ( A gust of air, momentary
interruption of gas supply or liquid spillage
etc).
To turn on the professional burner:
1. To simultaneously turn on both rings, turn the
knob anticlockwise to position it on the symbol
showing maximum ame for outer and inner
ring and push down the knob to ignite the
burner.
2. To keep only the inner ring ignited push down
the knob and turn it anticlockwise to position
showing maximum ame for inner ring and
turned o for outer.
If the burner does not ignite within about 15
seconds, switch o the burner, check the tting
of the burner cap and plate for correct tting.
Wait at least 1 minute before trying again.
If the burner goes out when the control knob is
released, the thermocouple did not engage.
Wait al least 1 minute before repeating steps 1
to 3.
1. Removable pan supports
2. Rapid burner
3. Auxiliary burner
4. Semi-rapid burner
5. Professional wok burner
6. Rapid burner control knob
7. Auxiliary burner control knob
8. Semi-rapid burner control knob
9. Professional wok burner
q
wert
y
uio
Product description and symbols
Control Symbols
Standard burners Professional burner
O O
Maximum ame Maximum ame outer ring/maximum ame inner ring
Minimum ame Minimum ame outer ring/maximum ame inner ring
Maximum ame inner ring/turned o outer ring
Minimum ame inner ring/turned o outer ring
Using the burners