Manual

ManualsBrandsKitchenAid ManualsBlenderOfficial KitchenAid blender

Table Of Contents

W10831307A_ENv13

KHBC412•KHBC412OB

KHBC414

•KHBC414OB

KHBC416

•KHBC416OB

KHBC418

•KHBC418OB

KHBC420

•KHBC420OB

KHBC410WOB

INSTRUCTIONS

INSTRUCCIONES

W10831307A_ENv13.indd 1 11/23/15 11:26 AM

Summary of content (20 pages)

PAGE 1
KHBC412 • KHBC412OB KHBC414 • KHBC414OB KHBC416 • KHBC416OB KHBC418 • KHBC418OB KHBC420 • KHBC420OB KHBC410WOB INSTRUCTIONS INSTRUCTIONS INSTRUCCIONES W10831307A_ENv13.
PAGE 2
C WELCOME TO THE WORLD OF KITCHENAID COMMERCIAL We’re committed to helping you create a lifetime of delicious dishes for your customers. To help ensure the longevity and performance of your appliance, keep this guide handy. It will empower you with the best way to use and care for your product. Your satisfaction is our #1 goal. Remember to register your product online at www.kitchenaidcommercial.com or by mail using the enclosed Product Registration Card. P 2 USA: 1.855.845.9684 Canada: 1.800.807.
PAGE 3
COMMERCIAL IMMERSION BLENDER INSTRUCTIONS English TABLE OF CONTENTS COMMERCIAL IMMERSION BLENDER SAFETY Important Safeguards ��4 Electrical Requirements ��5 Electrical Data for Immersion Blender & Attachments................................
PAGE 4
COMMERCIAL IMMERSION BLENDER SAFETY C IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put motor body, cord, or electrical plug of this Commercial Immersion Blender in water or other liquid. 3. This appliance should not be used by children and care should be taken when used near children. 4.
PAGE 5
COMMERCIAL IMMERSION BLENDER SAFETY English 10. Do not let cord contact hot surfaces, including the stove. 11. When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage and possibility of injury. 12. Keep hands and utensils out of the container while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used, but must be used only when the unit is not running. 13. Blades are sharp.
PAGE 6
COMMERCIAL IMMERSION BLENDER SAFETY C P Electrical Data for Immersion Blender and Attachments Immersion Blender Models KHBC412 KHBC414 KHBC418 KHBC416 KHBC420 Volts/Hertz Whisk Blending Arm KHBC110 KHBC112 KHBC114 KHBC116 KHBC118 KHBC120 120 V.A.C.
PAGE 7
CMD PARTS + AND SHIFT FEATURES CLICK TOGUIDE CHANGE COPY Commercial Immersion Blender parts English Lock Button Power/Pulse Trigger Speed Control Dial 12-ft.
PAGE 8
PARTS AND FEATURES GUIDE O Optional accessories Accessory Model # Style Whisk Attachment KHBC110WSS 10" (254 mm) Multi-Purpose S-Blade KHBC112SS 12" (305 mm) KHBC114SS 14" (356 mm) KHBC116SS KHBC118SS KHBC120SS Recommended Bowl Size KHBC412OB KHBC414OB KHBC416OB KHBC418OB KHBC420OB Length (KHB112SS shown) 16" (406 mm) 18" (457 mm) 20" (508 mm) 6 gallon bowl (maximum) 14 gallon bowl (maximum) 23 gallon bowl (maximum) 32 gallon bowl (maximum) 40 gallon bowl (maximum) Commercial Immersion Bl
PAGE 9
OPERATING THE COMMERCIAL IMMERSION BLENDER Before first use IMPORTANT: Do not immerse the motor body in water. Wash all the attachments and accessories by hand or in the dishwasher. Mild dish soap may be used, but do not use abrasive cleansers. Dry thoroughly with a soft cloth. English Before using the KitchenAid Commercial Immersion Blender for the first time, wipe the motor body with a clean, damp cloth to remove any dirt or dust.
PAGE 10
OPERATING THE COMMERCIAL IMMERSION BLENDER 3. Set Commercial Immersion Blender to your desired speed on the Speed Dial. For best results, insert Commercial Immersion Blender with Blending Arm attached into the pot or bowl containing ingredients at an angle. Use the removable Secondary Handle for better stability. Stop the Commercial Immersion Blender before removing it from the pot or bowl to avoid splashing. Blending Drawing up 4. Insert the Commercial Immersion Blender into the mixture.
PAGE 11
OPERATING THE COMMERCIAL IMMERSION BLENDER 6. When blending is complete, release the Power/Pulse Trigger before removing the Commercial Immersion Blender from the mixture. 7. Unplug immediately after use, before removing or changing attachments. IMPORTANT: If a piece of food becomes lodged in the guard surrounding the blade, follow these instructions: 1. Release the Power/Pulse Trigger and unplug the Commercial Immersion Blender. 2. Use a spatula to remove the food lodged in the plastic guard.
PAGE 12
OPERATING THE COMMERCIAL IMMERSION BLENDER 4. Insert the Whisk into the mixture. C O For best results, insert the Commercial Immersion Blender with the Whisk attached into the pot or bowl containing ingredients at an angle. Use your free hand to hold the pot or bowl or hold the Commercial Immersion Blender near the base of the motor unit for better stability. Remember to stop the Commercial Immersion Blender before removing it from the pot or bowl to avoid splashing.
PAGE 13
CMD + SHIFTTHE OPERATING CLICK COMMERCIAL TO CHANGE IMMERSION COPY BLENDER Using the Bowl Clamp and the Continuous Run feature IMPORTANT: Continuous Run feature maximum recommended mixing times: 30 minutes - Low Speed 10 minutes - High Speed 1. Slide the notched latch into the Bowl Clamp at the slot in the top of the clamp; then, use the adjustment wheel to tighten into place at the correct spot for the bowl you are using to mix. 2.
PAGE 14
CARE AND CLEANING T Washing the Motor Body NOTE: To avoid damage to the blender, do not immerse the motor body in washing solution, rinse water, or sanitizing solution. Always clean the Commercial Immersion Blender prior to initial use, after each use, and before storing. 1. Unplug Commercial Immersion Blender before cleaning. 2. Remove the attachments by twisting (see "Operating the Commercial Immersion Blender" section). 3.
PAGE 15
TROUBLESHOOTING If the Commercial Immersion Blender has stopped working, check for the following: Unit has been unplugged • Restart the Commercial Immersion Blender as instructed in “Operating the Commercial Immersion Blender”. English • Release the Power/Pulse Trigger. • Check the power supply. Machine has overheated • Release the Power/Pulse Trigger. • Unplug the unit. • Wait a few minutes for the motor to cool down and the thermal safety mechanism to reset.
PAGE 16
TECHNICAL CMD + SHIFT SPECIFICATIONS CLICK TO CHANGE COPY F A A (mm) B (mm) C (mm) E (mm) F (mm) G (lbs/kgs) KHBC112 73.4 420 926.6 383.9 101.5 115 9.5/4.3 KHBC114 73.4 420 875.8 434.7 101.5 115 9.7/4.4 KHBC116 73.4 420 485.5 101.5 115 9.9/4.5 KHBC118 73.4 420 774.2 434.7 101.5 115 10.1/4.6 KHBC120 73.4 420 723.4 383.9 101.5 115 10.3/4.7 825 D (mm) W B C D E 16 W10831307A_ENv13.
PAGE 17
WARRANTY AND SERVICE This warranty extends to the purchaser and any succeeding owner for Commercial Immersion Blenders operated in the 50 United States, the District of Columbia, and Canada. Length of Warranty: Two Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Commercial Immersion Blender. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-855-845-9684.
PAGE 18
WARRANTY AND SERVICE W KitchenAid® Commercial Immersion Blender Warranty for Puerto Rico A limited two year warranty extends to the purchaser and any succeeding owner for Commercial Immersion Blenders operated in Puerto Rico. During the warranty period, all service must be handled by an Authorized KitchenAid Service Center. Please bring the Commercial Immersion Blender, or ship it prepaid and insured, to the nearest Authorized Service Center.
PAGE 19
WARRANTY AND SERVICE Hassle-Free Replacement Warranty – Canada Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Commercial Immersion Blender will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.