Instructions / Assembly

ManualsBrandsKitchenAid ManualsCooktopArchitect Series II 30 in. Gas-on-Glass Downdraft Cooktop in Stainless Steel with 4 Burners including Pro Burner

To adjust standard burners:

The flame can be adjusted using the adjustment screw in the

center of the valve stem. The valve stem is located directly

underneath the control knob.

If the “low” flame needs to be adjusted:

1. Light 1 burner and turn to lowest setting.

2. Remove the control knob.

3. Hold the knob stem in the low position using a pair of pliers.

Use an ¹⁄₈" (3.0 mm) flat-blade screwdriver to turn the screw

located in the center of the control knob stem until the flame

is the proper size.

4. Replace the control knob.

5. Test the flame by turning the control from “LO” to “HI,”

checking the flame at each setting.

6. Repeat the above steps for each burner.

Complete Installation

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Check that you have all your tools.

3. Dispose of/recycle all packaging materials.

4. Use a mild solution of liquid household cleaner and warm

water to clean cooktop before use. Dry thoroughly with a soft

cloth. For more information, see the “Cooktop Care” section

of the Use and Care Guide.

5. Read “Cooktop Use” in the cooktop Use and Care Guide.

6. Reconnect power.

NOTE: If the cooktop does not work after turning on the power,

check that a circuit breaker has not tripped or a household fuse

has not blown. See “Troubleshooting” section in the Use and

Care Guide for further information.

7. Use the Flow Tester Card provided with your cooktop to

check the airflow (see card for step-by-step instructions).

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use

and Care Guide or contact the dealer from whom you purchased

your cooktop.

SÉCURITÉ DE LA TABLE DE CUISSON

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :