Owner's Manual

Table Of Contents

26. For Frame less Cabinets

1. Remove upper rack for easier access.

2. Use four Thick plastic (included) spacers between

cabinet wall and the side wall panels of the dishwasher.

3. Each spacers has three positions depending on the gap

available, insert the spacer into the side panel of the

dishwasher and turn the spacer by 90 degrees.

A. 3.5 mm x 18 mm

Phillips-head screws (4)

B. Thick plastic spacers (4)

C. Side gap covers (2)

4. Once the spacers are locked into the position. Secure the

dishwasher to cabinet with four 3.5 mm x 18 mm

Phillips-head screws (included).

NOTE:

� The dishwasher must be secured to keep it from

shifting when the door is opened or closed.

� Do not drop screws into bottom of dishwasher.

27. For Face Frame Cabinets

1. Use four Metal brackets (included) between Face frame

and the side wall panels of the dishwasher.

2. Each bracket needs to be inserted into the slots at the

side panel of the dishwasher and turn the brackets by

90 degrees towards the cabinet opening.

3. Once the spacers are locked into position, Secure the

dishwasher to cabinet with four 3.5 mm x 18 mm

Phillips-head screws (included).

A. 3.5 mm x 18 mm

Phillips-head screws (4)

B. Metal brackets (4)

C. Side gap covers (2)

NOTE:

� The dishwasher must be secured to keep it from

shifting when the door is opened or closed.

� Do not drop screws into bottom of dishwasher.

28. Break end of the brackets

Depending on the depth of the gap between dishwasher and

the face of the frame, Break off the end of the brackets along

the scored line using pliers to adjust the required length of

the bracket. Use sandpaper to smooth any burrs.

A. Score line