Instruction for Use

25 | EN
8 Troubleshooting
Oven emits steam when it is in use.
It is normal that steam escapes during operation. This is not a fault.
Water drops occur during cooking
The vapour that arises during cooking can condense and form water droplets when it hits
cold surfaces of the product. This is not a fault.
Product does not operate.
The mains fuse is defective or has tripped. Check fuses in the fuse box. If necessary,
replace or reset them.
Oven light does not work.
Oven lamp is defective. Replace oven lamp.
Power is cut. Check if there is power. Check the fuses in
the fuse box. If necessary, replace or reset
the fuses.
Oven does not heat.
Function and/or Temperature are not set. Set the function and the temperature with
the Function and/or Temperature knob/key.
Power is cut. Check if there is power. Check the fuses in
the fuse box. If necessary, replace or reset
the fuses.
Important
Consult the Authorised Service
A
gent or the dealer where you
have purchased the product if you
can not remedy the trouble
although you have implemented
the instructions in this section.
Never attempt to repair a defective
product yourself.