Australia Ё 䞲ῃ 5KFP1644 Brasil KJA16
FOOD PROCESSOR INSTRUCTIONS TABLE OF CONTENTS FOOD PROCESSOR SAFETY Important safeguards ................................................................................................. 3 Electrical requirements ............................................................................................. 5 PARTS AND FEATURES Parts and accessories ................................................................................................. 6 Selecting the right tools ...................................
English FOOD PROCESSOR SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3.
FOOD PROCESSOR SAFETY 8. The use of attachments not recommended or sold by .itchenAid may cause Àre, electric shock, or injury. 9. Do not use outdoors. 10. Do not let cord hang over edge of table or counter. 11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the Food Processor. A scraper may be used but must be used only when the Food Processor is not running. 12. Blades are sharp. Handle carefully. 13.
ELECTRICAL REQUIREMENTS For Brazil only: Voltage:127 Volts Frequency: 60 Hertz Wattage: 780 Watts English Voltage: 220-240 Volts Frequency: 50/60 Hertz Wattage: 650 Watts NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter.
PARTS AND FEATURES Parts and accessories 3-piece food pusher Lid with 3-in-1 feed tube Ultratight Seal 4 L Work bowl Externally adjustable blade control Die-cast base Accessory case 1 L Mini-bowl and mini-blade Dough blade Stainless steel multipurpose blade Spatula Egg whip 6
PARTS AND FEATURES Parts and accessories English DICING KIT ➃ Dicing kit lid 2.
PARTS AND FEATURES Selecting the right tools Action Setting Food 2 Mince Chop Vegetables Fruit Fresh herbs Nuts Meat Accessory Multipurpose stainless steel blade 1 2 OR Mini-bowl and mini multipurpose stainless steel blade Puree 1 2 Mix Pesto Sauces Cake batter Pie dough Cream 1 2 Yeast dough Plastic dough blade Fruit (soft) Potatoes Tomatoes Vegetables (soft) Adjustable slicing disc Knead 1 2 Slice thin Slice thick 1 2 Cheese Chocolate Fruit (hard) Vegetables (hard) 1 2 Shred mediu
PARTS AND FEATURES Selecting the right tools Food Setting 2 Grate Hard cheese Ice Chocolate Accessory Grate/shave disc Shave English Action 1 2 Potatoes Firm vegetables French fry disc Potatoes Tomatoes Onions Cucumbers Fruit Vegetables 8 mm dicing kit Fries Sticks 1 2 Dice 1 2 Eggs Egg whip Whip 1 2 Citrus fruit Citrus press Juice 1 9
USING YOUR FOOD PROCESSOR Attaching the work bowl Before First Use Before using your Food Processor for the first time, wash the bowls and accessories as described in the “Care and Cleaning” section. Power shaft Place the work bowl on the base as shown. 1 Be sure the Food Processor is turned off, unplugged, and placed on a level surface. 2 3 Turn work bowl to lock it on the base.
USING YOUR FOOD PROCESSOR Before Use Before operating the Food Processor, be sure the work bowl, blades, and lid are properly assembled on the Food Processor base. English Using the 3-in-1 feed tube Large food pusher Max Fill line on feed tube 1 Small food pusher Medium food pusher 2 Use the entire feed tube and the large food pusher to process large items. Use the medium food pusher in the feed tube to process smaller items.
USING YOUR FOOD PROCESSOR Using the speed controls NOTE: If the Food Processor fails to operate, make sure the work bowl and lid are properly locked on the base. 1 2 2 1 1 To turn on, Áip the speed lever to “2” (high) or “1” (low), then turn the dial to “I” (ON). 2 To stop, turn the dial to “O” (OFF). 1 Be sure the Food Processor is off and unplugged before disassembling.
English USING YOUR FOOD PROCESSOR 2 Turn the work bowl and lift to remove, and then turn and lift the lid. Finger er grip 3 Or turn the lid to unlock, as shown, and lift the lid to remove, continuing next steps with bowl still attached to Food Processor. Finger grip 4 If using a disc, remove it. Hold the disc by the 2 finger grips, lift it straight up. 5 If using a disc, remove the adapter. 6 If using a blade, remove by grasping and pulling straight up. 7 Turn the work bowl as shown.
USING YOUR ACCESSORIES Preparing the dicing kit for Àrst use IMPORTANT: Follow these directions in order to properly wash all parts of the dicing kit before using it for the first time. 14 1 Using the handle, place the assembled dicing kit into the work bowl. 2 When placing kit in the work bowl, line up the kit’s tab with the groove in the work bowl. 3 Rotate the dicing kit lid, using the finger tabs until it unlocks. 4 Using the handle, remove the dicing kit lid from the dicing kit.
USING YOUR ACCESSORIES English Installing/using the dicing kit 1 Place the disc adapter onto the power shaft. 2 Place the ➁ dicing kit grid, with the grid facing front, and line up the kit’s tab with the groove in the work bowl. “CLICK” 3 5 Place the ➂ dicing kit blade, making sure it is securely seated. 4 Place the ➃ dicing kid lid onto the assembled kit with the hole facing front, and lock into place. Place the lid on the Food Processor and use the medium feed tube to dice the desired items.
USING YOUR ACCESSORIES Installing/removing the multipurpose blade NOTE: The multipurpose blade has a spill resistant seal and can be left in work bowl, or removed before the contents are emptied. 1 Place the blade on the power shaft. Liquid level graphics on the side of the bowl indicate the maximum recommended levels for thick and thin liquids in the Food Processor. 4 2 Press down firmly on the blade. You will hear a click when the accessory locks into place.
USING YOUR ACCESSORIES Installing/removing the prep bowl English NOTE: The prep bowl can be used only with the discs and the dicing kit. 1 To use the prep bowl, place into the work bowl using the two finger grips. 2 Place the adapter on the power shaft. 3 Place the desired disc on the power shaft. Do not use any blades with the prep bowl. 4 Install the lid, aligning the tabs and locking it into place. 5 After processing, remove the prep bowl using the two finger grips.
USING YOUR ACCESSORIES Installing/removing the shredding, french fry, and parmesan discs 1 Place the adapter on the power shaft. 2 Slightly rotate the disc until it drops into place onto the adapter. Finger grip 3 Install the lid, aligning the tabs and locking it into place. 4 Finger grip To remove shredding disc and french fry disc, remove the lid and using the 2 finger grips, lift the disc straight up. NOTE: The shredding disc is reversible.
USING YOUR ACCESSORIES English Installing/removing the slicing disc 1 Place the disc on the power shaft. 2 Slightly rotate the disc until it drops into place. Finger grip 3 Install the lid, aligning the tabs and locking it into place. 4 Finger grip To remove slicing disc, remove lid and using the 2 finger grips, lift the disc straight up. Adjusting the slicing thickness NOTE: This lever only works with the adjustable slicing disc.
USING YOUR ACCESSORIES Installing/removing the mini-bowl and mini-blade Mini-blade Power shaft 20 1 Place the mini-bowl inside the work bowl, making sure the tab on the mini-bowl lines up with the notch in the work bowl. 2 Press down firmly on the mini-blade. You will hear a click when it locks into place. 3 Install the lid, aligning the tabs and locking it into place. 4 Remove the lid. Grasp and pull the mini-blade straight up. 5 Using the two finger grips lift the mini-bowl up.
USING YOUR ACCESSORIES English Installing/removing the citrus press 1 3 5 Place the citrus press adapter onto the power shaft. Turn the basket counter-clockwise until the clip locks into the handle. 2 Place the strainer basket in the work bowl with the locking clip positioned to the left of the work bowl handle. 4 Place the cone inside the strainer basket, connecting it to the adapter. It may be necessary to rotate the cone until it drops into place.
USING YOUR ACCESSORIES Installing/removing the egg whip or dough blade 22 1 Place the egg whip or dough blade onto power shaft. 3 After processing, firmly grasp egg whip or dough blade and lift straight up. 2 Press down firmly on the egg whip or dough blade. You will hear a click when the accessory locks into place.
IMPORTANT: Never use abrasive cleansers or scouring pads on the Food Processor. They may scratch or cloud the work bowl and cover. 1 Be sure the Food Processor is off and unplugged before disassembling. 3 All the other parts of the Food Processor are dishwasher safe. - Bowls should be loaded upside down, not on their sides. - Avoid using high temperature settings such as sanitize or steam settings. 4 To store, push the cord back inside of the Food Processor base.
TIPS FOR GREAT RESULTS Using the Multipurpose Blade To chop fresh fruits or vegetables: Peel, core, and/or remove seeds. Cut food in 1 to 2.5-4 cm (11/2-inch) pieces. Process food to desired size, using short pulses, 1 to 2 seconds each time. Scrape sides of bowl, if necessary. To puree cooked fruits and vegetables (except potatoes): Add 60 ml (1/4 cup) liquid from recipe per 235 ml (1 cup) of food. Process food, using short pulses, until Ànely chopped.
TIPS FOR GREAT RESULTS To slice or shred fruits or vegetables that are long and relatively small in diameter, such as celery, carrots, and bananas: Cut food to Àt feed tube vertically or horizontally, and pack feed tube securely to keep food positioned properly. Process using even pressure. Or use the small feed tube in the two-piece food pusher. Position food vertically in the tube and use the small food pusher to process food.
TIPS FOR GREAT RESULTS Helpful Hints • To avoid damage to the blade or motor, do not process food that is so hard or Àrmly frozen that it cannot be pierced with the tip of a sharp knife. If a piece of hard food, such as a carrot, becomes wedged or stuck on the blade, stop the processor and remove the blade. Gently remove food from the blade. • Do not overÀll work bowl or mini-bowl. For liquids, follow the maximum Àll levels indicated on the work bowl.
TIPS FOR GREAT RESULTS • If any plastic parts should discolor due to the types of food processed, clean them with lemon juice English • Use the spatula to remove ingredients from the work bowl. • Your Food Processor is not designed to perform the following functions: - Grind coffee beans, grains, or hard spices - Grind bones or other inedible parts of food - Liquefy raw fruits or vegetables - Slice hard-cooked eggs or unchilled meats.
