Manual

ManualsBrandsKitchenAid ManualsBlenderOfficial KitchenAid blender

Stand Blender

5KSB40A**

W11359422A.indd 1 09/09/2019 18:58:57

Summary of content (12 pages)

PAGE 1
Stand Blender 5KSB40A** W11359422A.
PAGE 2
PARTS AND FEATURES 1 6 10 2 7 16 13 3 3.1 8 14 11 OUN 8oz CES =1 Cup 48 oz 44 oz 40 oz 36 oz 32 oz 28 oz 24 oz 20 oz 16 oz 12 oz 9 15 12 4 17 5 1 Lid Centre Cap 9 Gear Assembly* 2 Lid with Vent Well 10 Personal Jar** (473 ml capacity) 3 Glass Jar**** (1.4 L capacity) 11 Blade Assembly of Personal Jar** 3.1 Jar (1.
PAGE 3
ENGLISH PRODUCT SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock do not put the Stand Blender Base in water or other liquid. 3.
PAGE 4
PRODUCT SAFETY 12. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to sudden steaming. 13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 14. Refer to the “Care and Cleaning” section for instructions on cleaning the surfaces in contact with food. 15. Always operate the Blender with cover in place. 16.
PAGE 5
ENGLISH PRODUCT SAFETY MOTOR HORSEPOWER Motor horsepower for the blender motor was measured using a dynamometer, a machine that laboratories routinely use to measure the mechanical power of motors. Our 1.5 peak horsepower (HP) motor reference reflects the horsepower output of the motor itself and not the Blender’s horsepower output in the blender jar. As with any blender, the power output in the jar is not the same as the horsepower of the motor itself.
PAGE 6
USING THE BLENDER Before first use, clean all parts and accessories (see “Care and Cleaning” section). Be sure the countertop beneath the Blender and surrounding areas are dry and clean. IMPORTANT : When moving your Blender, always support/lift from Blender Base. Base will become disengaged from jar if carried by Blender jar or Blender jar handle only. WARNING Electrical Shock Hazard Plug into an earthed outlet. Do not remove an earth prong. Do not use an adapter. Do not use an extension cord.
PAGE 7
5 ENGLISH USING THE BLENDER 6 3 2 4 5 1 0 P Pulse mode: Press ( ). Turn and hold the Control Dial from (O) to (P) as per desired interval of time. When finished, release the Control Dial to stop. Tamper accessory: Remove the Lid Centre Cap only. Stir or press contents down towards the blade. Then, place the Lid Centre cap back before resuming blending. IMPORTANT: Use the Tamper ONLY with the 1.6 L capacity Blender jar.
PAGE 8
USING THE PERSONAL JAR/SMALL BATCH JAR 3 4 3 4 5 2 1 0 P Turn from (O) to desired speed or preset recipe programme. Press ( ) to start. See “Blender Function Guide” for more details. Press ( ) to stop. Always remove the Personal Jar or Small Batch Jar with Blade Assembly from the Base. USING THE CITRUS PRESS Before first use, clean all parts and accessories (see “Care and Cleaning” section). 1 2 2 1 Drive Shaft Place the Gear Assembly on Base.
PAGE 9
5 2 1 ENGLISH USING THE CITRUS PRESS IMPORTANT: Allow the Blender to fully stop before removing the Reamer, Juice Container, or pouring out the juice. Twist the Juice Container counterclockwise and lift it by using handle. Pour and enjoy! CARE AND CLEANING USING THE CLEAN FUNCTION 1 2 3 2 4 5 1 0 P Fill half of the Jar with warm water and add 1 or 2 drops of dish-washing liquid. Place the Jar on the base. Secure the Lid and Lid Centre Cap. Turn from (O) to ( ). Press ( ) to start.
PAGE 10
TROUBLESHOOTING GUIDE WARNING Electrical Shock Hazard Plug into an earthed outlet. Do not remove an earth prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
PAGE 11
ENGLISH CUSTOMER SERVICE In Australia: For any questions, or to find the nearest Authorised KitchenAid Service Centre, please find our contact details below. NOTE: All service should be handled locally by an Authorised KitchenAid Service Centre. Toll free number: 1-800-990-990 Phone number: 02 49026500 Address Australia: KitchenAid Australia Pty Ltd 6-8 Billbrooke Close Cameron Park NSW 2285, Australia Phone: 1-800-990-990 Mobile: 0249026500 Email: enquiries@KitchenAid.com.au In New Zealand: Website: www.