Manual
4
12. Be careful if hot liquid is poured into the blender as it can be ejected out of the
appliance due to sudden steaming.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
14. Refer to the “Care and Cleaning” section for instructions on cleaning the
surfaces in contact with food.
15. Always operate the Blender with cover in place.
16. When blending hot liquids or ingredients, Lid Centre Cap shall remain in place
over the lid opening. Always start on lowest speed and slowly ramp to desired
speed when blending hot liquids or ingredients.
17. Do not blend hot liquids and ingredients in the Personal Jar or Small Batch Jar.
18. To reduce the risk of injury, never place cutter-assembly blades on Base without
Personal Jar or Small Batch Jar properly attached.
19. The use of attachments, including canning jars, not recommended or sold by the
manufacturer may cause a risk of injury to persons.
20. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, ofces, or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
PRODUCT SAFETY
MOTOR HORSEPOWER
Motor horsepower for the blender motor was measured using a dynamometer, a machine
that laboratories routinely use to measure the mechanical power of motors. Our 1.5 peak
horsepower (HP) motor reference reflects the horsepower output of the motor itself and not
the Blender’s horsepower output in the blender jar. As with any blender, the power output in
the jar is not the same as the horsepower of the motor itself.
W11434075A.indb 4W11434075A.indb 4 7/21/2020 12:14:31 PM7/21/2020 12:14:31 PM