User Manual

4
1) The marked electrical rating of the cord set or extension cord should be at least
as great as the electrical rating of the appliance, and
2) The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the rst few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
USING YOUR BURNER
Solid surface countertops can be easily scratched, cracked, scorched, or damaged, especially
when exposed to heat. To prevent damage, the following precautions should be observed
when using this product:
• Always use a trivet under heat generating sources such as Slow Cookers, Toaster Ovens,
Skillets, or any kitchen appliance.
Before using, operate the burner in order to burn off residue on the heating elements.
When doing this, it is suggested the HIGH heat setting be used.
HOW TO USE: Place on a at, smooth countertop surface. Be sure to place it in a safe
area where it will not fall or be pulled on by the cord, and provide at least 4 to 6 inches of
space above and around the unit for proper air circulation.
CAUTION: Never operate the unit in a tilted position, or if the heating element is not
properly in position. Plug unit into electrical wall outlet and turn the variable temerature
control to the desired heat setting.
NOTE: The dual burners operate independently of each other and each of the two
burners has a different wattage. They each have their own adjustable thermostat
to control the temperature. The burner on the right has a power output of 500
watts. The burner on the left has a power output of 1000 watts.
For best results, allow unit to heat for approximately one minute before placing pot or
pan on the burner. It is recommended to use pots or pans that are essentially the same
size as the burner. When using, the pot or pan should be placed in the center of the
burner. The burner operates similar to a stove-top burner. To boil water, set the variable
temperature control to the HIGH setting. To heat pre-cooked food, select the lower heat
settings.
NOTE: Always turn temperature control dial to the 12 o’clock position and unplug when
not in use.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user servicable parts. Do not
try to repair it yourself. Refer it to qualied personnel if servicing is needed.