Technical Specs

Replace a
lock within a
group
1. Sign into Portal - navigate to Remote Card Authorisation > Lock
Groups
2. Select the Lock Group
3. If you chose to not have the Portal remember the Lock Group ID,
enter the Lock Group ID manually
4. Select the lock you wish to replace/deactivate
1. Replace: Click "Replace or Re-initialise Lock"
2. Deactivate: Click "Deactivate"
1. Note: This option deactivates the lock within the
Portal. You may still need to remove the physical
lock
5. Click Save & Commit. If you are replacing or re-initialising a lock,
continue. Otherwise, there are no further steps.
6. Open your Codelocks Card Manager Client software (on your
PC), place a MIFARE card on the USB card reader
7. From the list of available actions, select the "Re-initialise Lock"
action
8. In the CCMC software, click "Apply" - once the information has
been written to the card, a confirmation message will be
displayed and you will be able to use the card to re-initialise the
respective lock.
1. Note: This Initialisation Card must be kept secure and/or
destroyed after use. This card is NOT the same as a
Master Card.
TO INITIALISE THE LOCK, REFER TO Lock Initialisation.